Design, Implementation and Testing of Operational Modes in ADCS of a CubeSat

Abdulrahman Sulaiman; Hamad Shahdad; Ahmed Alghfeli; Omar Alhammadi; Faisal Alothali; Mohammed Atallah; Mohamed Okasha; Abdul Halim Jallad

doi:10.1109/ICMAE56000.2022.9852877

Design, Implementation and Testing of Operational Modes in ADCS of a CubeSat

Abdulrahman Sulaiman, Hamad Shahdad, Ahmed Alghfeli, Omar Alhammadi, Faisal Alothali, Mohammed Atallah, Mohamed Okasha, Abdul Halim Jallad

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

5 Citations (Scopus)

Abstract

This paper presents design, implementation and testing of attitude determination and control subsystem (ADCS) in CubeSat. The procedures of designing the subsystem are discussed. They include mission requirements and specifications, sizing, components selection, software and hardware design. The proposed subsystem is experimentally tested by using low-cost experimental setup. This setup includes an air bearing table that allows 1-DOF friction-less rotation of the CubeSat. The Detumbling and the sun-pointing modes are experimentally demonstrated by using this setup.

Original language	English
Title of host publication	2022 13th International Conference on Mechanical and Aerospace Engineering, ICMAE 2022
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	130-137
Number of pages	8
ISBN (Electronic)	9781665472357
DOIs	https://doi.org/10.1109/ICMAE56000.2022.9852877
Publication status	Published - 2022
Event	13th International Conference on Mechanical and Aerospace Engineering, ICMAE 2022 - Bratislava, Slovakia Duration: Jul 20 2022 → Jul 22 2022

Publication series

Name	2022 13th International Conference on Mechanical and Aerospace Engineering, ICMAE 2022

Conference

Conference	13th International Conference on Mechanical and Aerospace Engineering, ICMAE 2022
Country/Territory	Slovakia
City	Bratislava
Period	7/20/22 → 7/22/22

Keywords

ADCS
CubeSat
Detumbling
Sun-Pointing

ASJC Scopus subject areas

Industrial and Manufacturing Engineering
Mechanical Engineering
Safety, Risk, Reliability and Quality
Metals and Alloys
Aerospace Engineering

Access to Document

10.1109/ICMAE56000.2022.9852877

Cite this

Sulaiman, A., Shahdad, H., Alghfeli, A., Alhammadi, O., Alothali, F., Atallah, M., Okasha, M., & Jallad, A. H. (2022). Design, Implementation and Testing of Operational Modes in ADCS of a CubeSat. In 2022 13th International Conference on Mechanical and Aerospace Engineering, ICMAE 2022 (pp. 130-137). (2022 13th International Conference on Mechanical and Aerospace Engineering, ICMAE 2022). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICMAE56000.2022.9852877

Design, Implementation and Testing of Operational Modes in ADCS of a CubeSat. / Sulaiman, Abdulrahman; Shahdad, Hamad; Alghfeli, Ahmed et al.
2022 13th International Conference on Mechanical and Aerospace Engineering, ICMAE 2022. Institute of Electrical and Electronics Engineers Inc., 2022. p. 130-137 (2022 13th International Conference on Mechanical and Aerospace Engineering, ICMAE 2022).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Sulaiman, A, Shahdad, H, Alghfeli, A, Alhammadi, O, Alothali, F, Atallah, M, Okasha, M & Jallad, AH 2022, Design, Implementation and Testing of Operational Modes in ADCS of a CubeSat. in 2022 13th International Conference on Mechanical and Aerospace Engineering, ICMAE 2022. 2022 13th International Conference on Mechanical and Aerospace Engineering, ICMAE 2022, Institute of Electrical and Electronics Engineers Inc., pp. 130-137, 13th International Conference on Mechanical and Aerospace Engineering, ICMAE 2022, Bratislava, Slovakia, 7/20/22. https://doi.org/10.1109/ICMAE56000.2022.9852877

Sulaiman A, Shahdad H, Alghfeli A, Alhammadi O, Alothali F, Atallah M et al. Design, Implementation and Testing of Operational Modes in ADCS of a CubeSat. In 2022 13th International Conference on Mechanical and Aerospace Engineering, ICMAE 2022. Institute of Electrical and Electronics Engineers Inc. 2022. p. 130-137. (2022 13th International Conference on Mechanical and Aerospace Engineering, ICMAE 2022). doi: 10.1109/ICMAE56000.2022.9852877

Sulaiman, Abdulrahman ; Shahdad, Hamad ; Alghfeli, Ahmed et al. / Design, Implementation and Testing of Operational Modes in ADCS of a CubeSat. 2022 13th International Conference on Mechanical and Aerospace Engineering, ICMAE 2022. Institute of Electrical and Electronics Engineers Inc., 2022. pp. 130-137 (2022 13th International Conference on Mechanical and Aerospace Engineering, ICMAE 2022).

@inproceedings{d34bdaf0214747a7b14e063af6afc0e0,

title = "Design, Implementation and Testing of Operational Modes in ADCS of a CubeSat",

abstract = "This paper presents design, implementation and testing of attitude determination and control subsystem (ADCS) in CubeSat. The procedures of designing the subsystem are discussed. They include mission requirements and specifications, sizing, components selection, software and hardware design. The proposed subsystem is experimentally tested by using low-cost experimental setup. This setup includes an air bearing table that allows 1-DOF friction-less rotation of the CubeSat. The Detumbling and the sun-pointing modes are experimentally demonstrated by using this setup.",

keywords = "ADCS, CubeSat, Detumbling, Sun-Pointing",

author = "Abdulrahman Sulaiman and Hamad Shahdad and Ahmed Alghfeli and Omar Alhammadi and Faisal Alothali and Mohammed Atallah and Mohamed Okasha and Jallad, \{Abdul Halim\}",

note = "Publisher Copyright: {\textcopyright} 2022 IEEE.; 13th International Conference on Mechanical and Aerospace Engineering, ICMAE 2022 ; Conference date: 20-07-2022 Through 22-07-2022",

year = "2022",

doi = "10.1109/ICMAE56000.2022.9852877",

language = "English",

series = "2022 13th International Conference on Mechanical and Aerospace Engineering, ICMAE 2022",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "130--137",

booktitle = "2022 13th International Conference on Mechanical and Aerospace Engineering, ICMAE 2022",

}

TY - GEN

T1 - Design, Implementation and Testing of Operational Modes in ADCS of a CubeSat

AU - Sulaiman, Abdulrahman

AU - Shahdad, Hamad

AU - Alghfeli, Ahmed

AU - Alhammadi, Omar

AU - Alothali, Faisal

AU - Atallah, Mohammed

AU - Okasha, Mohamed

AU - Jallad, Abdul Halim

PY - 2022

Y1 - 2022

N2 - This paper presents design, implementation and testing of attitude determination and control subsystem (ADCS) in CubeSat. The procedures of designing the subsystem are discussed. They include mission requirements and specifications, sizing, components selection, software and hardware design. The proposed subsystem is experimentally tested by using low-cost experimental setup. This setup includes an air bearing table that allows 1-DOF friction-less rotation of the CubeSat. The Detumbling and the sun-pointing modes are experimentally demonstrated by using this setup.

AB - This paper presents design, implementation and testing of attitude determination and control subsystem (ADCS) in CubeSat. The procedures of designing the subsystem are discussed. They include mission requirements and specifications, sizing, components selection, software and hardware design. The proposed subsystem is experimentally tested by using low-cost experimental setup. This setup includes an air bearing table that allows 1-DOF friction-less rotation of the CubeSat. The Detumbling and the sun-pointing modes are experimentally demonstrated by using this setup.

KW - ADCS

KW - CubeSat

KW - Detumbling

KW - Sun-Pointing

UR - http://www.scopus.com/inward/record.url?scp=85137261959&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85137261959&partnerID=8YFLogxK

U2 - 10.1109/ICMAE56000.2022.9852877

DO - 10.1109/ICMAE56000.2022.9852877

M3 - Conference contribution

AN - SCOPUS:85137261959

T3 - 2022 13th International Conference on Mechanical and Aerospace Engineering, ICMAE 2022

SP - 130

EP - 137

BT - 2022 13th International Conference on Mechanical and Aerospace Engineering, ICMAE 2022

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 13th International Conference on Mechanical and Aerospace Engineering, ICMAE 2022

Y2 - 20 July 2022 through 22 July 2022

ER -

Design, Implementation and Testing of Operational Modes in ADCS of a CubeSat

Abstract

Publication series

Conference

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this