Effect of network parameters on the injection current requirement of D-STATCOM designed to mitigate voltage sag

Abdollah Shokri; Hussain Shareef; Azah Mohamed; Hadi Zayandehroodi; Masoud Farhoodnea

doi:10.19026/rjaset.5.5098

Effect of network parameters on the injection current requirement of D-STATCOM designed to mitigate voltage sag

Abdollah Shokri, Hussain Shareef, Azah Mohamed, Hadi Zayandehroodi, Masoud Farhoodnea

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Abstract

The Distribution Static Compensator (D-STATCOM) can be used as a parallel voltage sag mitigation device at distribution systems. The D-STATCOM is also able to regulate and balance the bus voltage by absorbing or generating the required reactive power at specific buses. This study presents an overview on D-STATCOM structure and its simplified model that can be used for voltage sag analysis. In addition, this study also investigates the effect of various load and network parameters on the nominal power requirement D-STATCOM and its ability to compensate voltage sag. The results illustrate the performance of D-STATCOM by using an injection current to various conditions for voltage sag mitigation. In addition, the result shows that the D-STATCOM is not economical and effective in high voltage networks with low inductance feeder.

Original language	English
Pages (from-to)	161-166
Number of pages	6
Journal	Research Journal of Applied Sciences, Engineering and Technology
Volume	5
Issue number	1
DOIs	https://doi.org/10.19026/rjaset.5.5098
Publication status	Published - 2013
Externally published	Yes

Keywords

D-STATCOM
Power quality
Power quality disturbances
Voltage sag
Voltage sag compensation

ASJC Scopus subject areas

Computer Science(all)
Engineering(all)

Access to Document

10.19026/rjaset.5.5098

Cite this

@article{2a5dd6763e6b4d3294ca7d8921ee8bc8,

title = "Effect of network parameters on the injection current requirement of D-STATCOM designed to mitigate voltage sag",

abstract = "The Distribution Static Compensator (D-STATCOM) can be used as a parallel voltage sag mitigation device at distribution systems. The D-STATCOM is also able to regulate and balance the bus voltage by absorbing or generating the required reactive power at specific buses. This study presents an overview on D-STATCOM structure and its simplified model that can be used for voltage sag analysis. In addition, this study also investigates the effect of various load and network parameters on the nominal power requirement D-STATCOM and its ability to compensate voltage sag. The results illustrate the performance of D-STATCOM by using an injection current to various conditions for voltage sag mitigation. In addition, the result shows that the D-STATCOM is not economical and effective in high voltage networks with low inductance feeder.",

keywords = "D-STATCOM, Power quality, Power quality disturbances, Voltage sag, Voltage sag compensation",

author = "Abdollah Shokri and Hussain Shareef and Azah Mohamed and Hadi Zayandehroodi and Masoud Farhoodnea",

year = "2013",

doi = "10.19026/rjaset.5.5098",

language = "English",

volume = "5",

pages = "161--166",

journal = "Research Journal of Applied Sciences, Engineering and Technology",

issn = "2040-7459",

publisher = "Maxwell Scientific Publications",

number = "1",

}

TY - JOUR

T1 - Effect of network parameters on the injection current requirement of D-STATCOM designed to mitigate voltage sag

AU - Shokri, Abdollah

AU - Shareef, Hussain

AU - Mohamed, Azah

AU - Zayandehroodi, Hadi

AU - Farhoodnea, Masoud

PY - 2013

Y1 - 2013

N2 - The Distribution Static Compensator (D-STATCOM) can be used as a parallel voltage sag mitigation device at distribution systems. The D-STATCOM is also able to regulate and balance the bus voltage by absorbing or generating the required reactive power at specific buses. This study presents an overview on D-STATCOM structure and its simplified model that can be used for voltage sag analysis. In addition, this study also investigates the effect of various load and network parameters on the nominal power requirement D-STATCOM and its ability to compensate voltage sag. The results illustrate the performance of D-STATCOM by using an injection current to various conditions for voltage sag mitigation. In addition, the result shows that the D-STATCOM is not economical and effective in high voltage networks with low inductance feeder.

AB - The Distribution Static Compensator (D-STATCOM) can be used as a parallel voltage sag mitigation device at distribution systems. The D-STATCOM is also able to regulate and balance the bus voltage by absorbing or generating the required reactive power at specific buses. This study presents an overview on D-STATCOM structure and its simplified model that can be used for voltage sag analysis. In addition, this study also investigates the effect of various load and network parameters on the nominal power requirement D-STATCOM and its ability to compensate voltage sag. The results illustrate the performance of D-STATCOM by using an injection current to various conditions for voltage sag mitigation. In addition, the result shows that the D-STATCOM is not economical and effective in high voltage networks with low inductance feeder.

KW - D-STATCOM

KW - Power quality

KW - Power quality disturbances

KW - Voltage sag

KW - Voltage sag compensation

UR - http://www.scopus.com/inward/record.url?scp=84872785647&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84872785647&partnerID=8YFLogxK

U2 - 10.19026/rjaset.5.5098

DO - 10.19026/rjaset.5.5098

M3 - Article

AN - SCOPUS:84872785647

SN - 2040-7459

VL - 5

SP - 161

EP - 166

JO - Research Journal of Applied Sciences, Engineering and Technology

JF - Research Journal of Applied Sciences, Engineering and Technology

IS - 1

ER -

Effect of network parameters on the injection current requirement of D-STATCOM designed to mitigate voltage sag

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this