Employing Low-Concentration Photovoltaic Systems to Meet Thermal Energy Demand in Buildings

This study evaluates the energy performance and efficiency of a low-concentration photovoltaic (CPV) system integrated with a phase change material (PCM), referred to as the CPV–PCM system, which stores and delivers thermal energy for building applications. A paraffin-based PCM with a melting point range of 58–60 °C was selected to align with typical building temperature requirements. The system was tested over three consecutive days in July at Al Ain, United Arab Emirates, under extreme climatic conditions (2100 W/m² solar irradiance, 35–45 °C ambient temperature), and its performance was compared to standard CPV and traditional tracked PV systems. The results demonstrate that PCM integration significantly enhances thermal regulation, reducing CPV peak temperatures by 38 °C (from 123 °C to 85 °C) and average temperatures by 22 °C (from 88 °C to 66 °C). The CPV–PCM system achieved a total energy efficiency of 60%, doubling that of standard CPV (30%) and tracked PV (25%), with cumulative electrical and thermal energy outputs of 370 Wh and 290 Wh, respectively. This dual electrical–thermal output enables the system to meet building heating demands, such as ~200–300 Wh/m² for domestic hot water and ~100–150 Wh/m² for space heating in United Arab Emirates winters, positioning it as a sustainable solution for energy-efficient buildings in arid regions. The findings underscore the advantages of PCM-based thermal control in CPV systems for hot climates, addressing gaps in prior studies focused on moderate conditions. Future research should explore long-term durability, optimized containment techniques, and alternative PCMs to further improve performance.