High gain transimpedance amplifier with current mirror load

Mohamed Atef

doi:10.1109/MIXDES.2014.6872189

High gain transimpedance amplifier with current mirror load

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Abstract

This work presents the design of transimpedance amplifier (TIA) with current mirror load implemented in a 130 nm CMOS technology. The proposed TIA uses a common source (CS) TIA with a shunt feedback resistor with current mirror load to increase the TIA gain. The TIA is followed by post amplifier chain consisting of two-stage differential amplifier and a 50 Ω differential output driver to provide an interface to the measurement setup. The complete optical receiver shows an optical sensitivity of -20.3dBm for a BER= 10 ^-12. The TIA alone achieves a transimpedance gain of 64.5 dBΩ, 1.05 GHz bandwidth at 2 pF total input capacitance. The current consumption of the TIA is 2.1 mA for a 1.8V single supply voltage.

Original language	English
Title of host publication	Proceedings of the 21st International Conference on Mixed Design of Integrated Circuits and Systems, MIXDES 2014
Publisher	IEEE Computer Society
Pages	220-223
Number of pages	4
ISBN (Print)	9788363578046
DOIs	https://doi.org/10.1109/MIXDES.2014.6872189
Publication status	Published - 2014
Externally published	Yes
Event	21st International Conference on Mixed Design of Integrated Circuits and Systems, MIXDES 2014 - Lublin, Poland Duration: Jun 19 2014 → Jun 21 2014

Publication series

Name	Proceedings of the 21st International Conference on Mixed Design of Integrated Circuits and Systems, MIXDES 2014

Conference

Conference	21st International Conference on Mixed Design of Integrated Circuits and Systems, MIXDES 2014
Country/Territory	Poland
City	Lublin
Period	6/19/14 → 6/21/14

Keywords

Current mirror load
Optical receiver
Transimpedance amplifier

ASJC Scopus subject areas

Hardware and Architecture
Electrical and Electronic Engineering

Access to Document

10.1109/MIXDES.2014.6872189

Cite this

Atef, M. (2014). High gain transimpedance amplifier with current mirror load. In Proceedings of the 21st International Conference on Mixed Design of Integrated Circuits and Systems, MIXDES 2014 (pp. 220-223). Article 6872189 (Proceedings of the 21st International Conference on Mixed Design of Integrated Circuits and Systems, MIXDES 2014). IEEE Computer Society. https://doi.org/10.1109/MIXDES.2014.6872189

High gain transimpedance amplifier with current mirror load. / Atef, Mohamed.
Proceedings of the 21st International Conference on Mixed Design of Integrated Circuits and Systems, MIXDES 2014. IEEE Computer Society, 2014. p. 220-223 6872189 (Proceedings of the 21st International Conference on Mixed Design of Integrated Circuits and Systems, MIXDES 2014).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Atef, M 2014, High gain transimpedance amplifier with current mirror load. in Proceedings of the 21st International Conference on Mixed Design of Integrated Circuits and Systems, MIXDES 2014., 6872189, Proceedings of the 21st International Conference on Mixed Design of Integrated Circuits and Systems, MIXDES 2014, IEEE Computer Society, pp. 220-223, 21st International Conference on Mixed Design of Integrated Circuits and Systems, MIXDES 2014, Lublin, Poland, 6/19/14. https://doi.org/10.1109/MIXDES.2014.6872189

Atef M. High gain transimpedance amplifier with current mirror load. In Proceedings of the 21st International Conference on Mixed Design of Integrated Circuits and Systems, MIXDES 2014. IEEE Computer Society. 2014. p. 220-223. 6872189. (Proceedings of the 21st International Conference on Mixed Design of Integrated Circuits and Systems, MIXDES 2014). doi: 10.1109/MIXDES.2014.6872189

@inproceedings{4ec5ea131371426b95f73f442d070b0f,

title = "High gain transimpedance amplifier with current mirror load",

abstract = "This work presents the design of transimpedance amplifier (TIA) with current mirror load implemented in a 130 nm CMOS technology. The proposed TIA uses a common source (CS) TIA with a shunt feedback resistor with current mirror load to increase the TIA gain. The TIA is followed by post amplifier chain consisting of two-stage differential amplifier and a 50 Ω differential output driver to provide an interface to the measurement setup. The complete optical receiver shows an optical sensitivity of -20.3dBm for a BER= 10 -12. The TIA alone achieves a transimpedance gain of 64.5 dBΩ, 1.05 GHz bandwidth at 2 pF total input capacitance. The current consumption of the TIA is 2.1 mA for a 1.8V single supply voltage.",

keywords = "Current mirror load, Optical receiver, Transimpedance amplifier",

author = "Mohamed Atef",

year = "2014",

doi = "10.1109/MIXDES.2014.6872189",

language = "English",

isbn = "9788363578046",

series = "Proceedings of the 21st International Conference on Mixed Design of Integrated Circuits and Systems, MIXDES 2014",

publisher = "IEEE Computer Society",

pages = "220--223",

booktitle = "Proceedings of the 21st International Conference on Mixed Design of Integrated Circuits and Systems, MIXDES 2014",

note = "21st International Conference on Mixed Design of Integrated Circuits and Systems, MIXDES 2014 ; Conference date: 19-06-2014 Through 21-06-2014",

}

TY - GEN

T1 - High gain transimpedance amplifier with current mirror load

AU - Atef, Mohamed

PY - 2014

Y1 - 2014

N2 - This work presents the design of transimpedance amplifier (TIA) with current mirror load implemented in a 130 nm CMOS technology. The proposed TIA uses a common source (CS) TIA with a shunt feedback resistor with current mirror load to increase the TIA gain. The TIA is followed by post amplifier chain consisting of two-stage differential amplifier and a 50 Ω differential output driver to provide an interface to the measurement setup. The complete optical receiver shows an optical sensitivity of -20.3dBm for a BER= 10 -12. The TIA alone achieves a transimpedance gain of 64.5 dBΩ, 1.05 GHz bandwidth at 2 pF total input capacitance. The current consumption of the TIA is 2.1 mA for a 1.8V single supply voltage.

AB - This work presents the design of transimpedance amplifier (TIA) with current mirror load implemented in a 130 nm CMOS technology. The proposed TIA uses a common source (CS) TIA with a shunt feedback resistor with current mirror load to increase the TIA gain. The TIA is followed by post amplifier chain consisting of two-stage differential amplifier and a 50 Ω differential output driver to provide an interface to the measurement setup. The complete optical receiver shows an optical sensitivity of -20.3dBm for a BER= 10 -12. The TIA alone achieves a transimpedance gain of 64.5 dBΩ, 1.05 GHz bandwidth at 2 pF total input capacitance. The current consumption of the TIA is 2.1 mA for a 1.8V single supply voltage.

KW - Current mirror load

KW - Optical receiver

KW - Transimpedance amplifier

UR - http://www.scopus.com/inward/record.url?scp=84906678378&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84906678378&partnerID=8YFLogxK

U2 - 10.1109/MIXDES.2014.6872189

DO - 10.1109/MIXDES.2014.6872189

M3 - Conference contribution

AN - SCOPUS:84906678378

SN - 9788363578046

T3 - Proceedings of the 21st International Conference on Mixed Design of Integrated Circuits and Systems, MIXDES 2014

SP - 220

EP - 223

BT - Proceedings of the 21st International Conference on Mixed Design of Integrated Circuits and Systems, MIXDES 2014

PB - IEEE Computer Society

T2 - 21st International Conference on Mixed Design of Integrated Circuits and Systems, MIXDES 2014

Y2 - 19 June 2014 through 21 June 2014

ER -

High gain transimpedance amplifier with current mirror load

Abstract

Publication series

Conference

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this