Structural Analysis of Monocoque Chassis with and without a B-Pillar

Moath Zaareer; Mohammad Ghazi Alshneeqat; Mohamed Qasem; Muneer Sungur; Mohamed Aneesa; Abdel Hamid I. Mourad

doi:10.1109/ASET53988.2022.9734905

Structural Analysis of Monocoque Chassis with and without a B-Pillar

Moath Zaareer, Mohammad Ghazi Alshneeqat, Mohamed Qasem, Muneer Sungur, Mohamed Aneesa, Abdel Hamid I. Mourad

Department of Mechanical and Aerospace Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Abstract

Fusion360 was used to design a vehicles chassis with and without B pillar, then implementing structural analysis to measure the structural rigidity, and capability to handle stresses, and total deformation. Two car chassis designs are made, with and without the b-pillar and subjected to two structural stress tests, a side and a roof force impact. The stress analysis performed in Fusion360 shows that the b-pillar has little effect on the roof support, where the difference in maximum stress and total deformation is very small. However, a very significant difference is recorded in the side force test where a 111% more deformation occurs, and 32% more maximum stress handled by the existence of a B-pillar. This result is logical as the B-pillar acts as a side reinforcement more than reinforcing the roof.

Original language	English
Title of host publication	2022 Advances in Science and Engineering Technology International Conferences, ASET 2022
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)	9781665418010
DOIs	https://doi.org/10.1109/ASET53988.2022.9734905
Publication status	Published - 2022
Event	2022 Advances in Science and Engineering Technology International Conferences, ASET 2022 - Dubai, United Arab Emirates Duration: Feb 21 2022 → Feb 24 2022

Publication series

Name	2022 Advances in Science and Engineering Technology International Conferences, ASET 2022

Conference

Conference	2022 Advances in Science and Engineering Technology International Conferences, ASET 2022
Country/Territory	United Arab Emirates
City	Dubai
Period	2/21/22 → 2/24/22

Keywords

force test
Fusion360
Monocoque Chassis
Structural Analysis

ASJC Scopus subject areas

Process Chemistry and Technology
Artificial Intelligence
Energy Engineering and Power Technology
Renewable Energy, Sustainability and the Environment
Electrical and Electronic Engineering
Industrial and Manufacturing Engineering
Mechanical Engineering
Waste Management and Disposal

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1109/ASET53988.2022.9734905

Cite this

Zaareer, M., Alshneeqat, M. G., Qasem, M., Sungur, M., Aneesa, M., & Mourad, A. H. I. (2022). Structural Analysis of Monocoque Chassis with and without a B-Pillar. In 2022 Advances in Science and Engineering Technology International Conferences, ASET 2022 (2022 Advances in Science and Engineering Technology International Conferences, ASET 2022). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ASET53988.2022.9734905

Structural Analysis of Monocoque Chassis with and without a B-Pillar. / Zaareer, Moath; Alshneeqat, Mohammad Ghazi; Qasem, Mohamed et al.
2022 Advances in Science and Engineering Technology International Conferences, ASET 2022. Institute of Electrical and Electronics Engineers Inc., 2022. (2022 Advances in Science and Engineering Technology International Conferences, ASET 2022).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Zaareer, M, Alshneeqat, MG, Qasem, M, Sungur, M, Aneesa, M & Mourad, AHI 2022, Structural Analysis of Monocoque Chassis with and without a B-Pillar. in 2022 Advances in Science and Engineering Technology International Conferences, ASET 2022. 2022 Advances in Science and Engineering Technology International Conferences, ASET 2022, Institute of Electrical and Electronics Engineers Inc., 2022 Advances in Science and Engineering Technology International Conferences, ASET 2022, Dubai, United Arab Emirates, 2/21/22. https://doi.org/10.1109/ASET53988.2022.9734905

Zaareer M, Alshneeqat MG, Qasem M, Sungur M, Aneesa M, Mourad AHI. Structural Analysis of Monocoque Chassis with and without a B-Pillar. In 2022 Advances in Science and Engineering Technology International Conferences, ASET 2022. Institute of Electrical and Electronics Engineers Inc. 2022. (2022 Advances in Science and Engineering Technology International Conferences, ASET 2022). doi: 10.1109/ASET53988.2022.9734905

Zaareer, Moath ; Alshneeqat, Mohammad Ghazi ; Qasem, Mohamed et al. / Structural Analysis of Monocoque Chassis with and without a B-Pillar. 2022 Advances in Science and Engineering Technology International Conferences, ASET 2022. Institute of Electrical and Electronics Engineers Inc., 2022. (2022 Advances in Science and Engineering Technology International Conferences, ASET 2022).

@inproceedings{9f46eb263f0540078a3c841a994a685c,

title = "Structural Analysis of Monocoque Chassis with and without a B-Pillar",

abstract = "Fusion360 was used to design a vehicles chassis with and without B pillar, then implementing structural analysis to measure the structural rigidity, and capability to handle stresses, and total deformation. Two car chassis designs are made, with and without the b-pillar and subjected to two structural stress tests, a side and a roof force impact. The stress analysis performed in Fusion360 shows that the b-pillar has little effect on the roof support, where the difference in maximum stress and total deformation is very small. However, a very significant difference is recorded in the side force test where a 111% more deformation occurs, and 32% more maximum stress handled by the existence of a B-pillar. This result is logical as the B-pillar acts as a side reinforcement more than reinforcing the roof.",

keywords = "force test, Fusion360, Monocoque Chassis, Structural Analysis",

author = "Moath Zaareer and Alshneeqat, {Mohammad Ghazi} and Mohamed Qasem and Muneer Sungur and Mohamed Aneesa and Mourad, {Abdel Hamid I.}",

note = "Publisher Copyright: {\textcopyright} 2022 IEEE.; 2022 Advances in Science and Engineering Technology International Conferences, ASET 2022 ; Conference date: 21-02-2022 Through 24-02-2022",

year = "2022",

doi = "10.1109/ASET53988.2022.9734905",

language = "English",

series = "2022 Advances in Science and Engineering Technology International Conferences, ASET 2022",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "2022 Advances in Science and Engineering Technology International Conferences, ASET 2022",

}

TY - GEN

T1 - Structural Analysis of Monocoque Chassis with and without a B-Pillar

AU - Zaareer, Moath

AU - Alshneeqat, Mohammad Ghazi

AU - Qasem, Mohamed

AU - Sungur, Muneer

AU - Aneesa, Mohamed

AU - Mourad, Abdel Hamid I.

PY - 2022

Y1 - 2022

N2 - Fusion360 was used to design a vehicles chassis with and without B pillar, then implementing structural analysis to measure the structural rigidity, and capability to handle stresses, and total deformation. Two car chassis designs are made, with and without the b-pillar and subjected to two structural stress tests, a side and a roof force impact. The stress analysis performed in Fusion360 shows that the b-pillar has little effect on the roof support, where the difference in maximum stress and total deformation is very small. However, a very significant difference is recorded in the side force test where a 111% more deformation occurs, and 32% more maximum stress handled by the existence of a B-pillar. This result is logical as the B-pillar acts as a side reinforcement more than reinforcing the roof.

AB - Fusion360 was used to design a vehicles chassis with and without B pillar, then implementing structural analysis to measure the structural rigidity, and capability to handle stresses, and total deformation. Two car chassis designs are made, with and without the b-pillar and subjected to two structural stress tests, a side and a roof force impact. The stress analysis performed in Fusion360 shows that the b-pillar has little effect on the roof support, where the difference in maximum stress and total deformation is very small. However, a very significant difference is recorded in the side force test where a 111% more deformation occurs, and 32% more maximum stress handled by the existence of a B-pillar. This result is logical as the B-pillar acts as a side reinforcement more than reinforcing the roof.

KW - force test

KW - Fusion360

KW - Monocoque Chassis

KW - Structural Analysis

UR - http://www.scopus.com/inward/record.url?scp=85128366624&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85128366624&partnerID=8YFLogxK

U2 - 10.1109/ASET53988.2022.9734905

DO - 10.1109/ASET53988.2022.9734905

M3 - Conference contribution

AN - SCOPUS:85128366624

T3 - 2022 Advances in Science and Engineering Technology International Conferences, ASET 2022

BT - 2022 Advances in Science and Engineering Technology International Conferences, ASET 2022

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2022 Advances in Science and Engineering Technology International Conferences, ASET 2022

Y2 - 21 February 2022 through 24 February 2022

ER -

Structural Analysis of Monocoque Chassis with and without a B-Pillar

Abstract

Publication series

Conference

Keywords

ASJC Scopus subject areas

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this