Wellbore path estimation using measurement while drilling techniques: A comparative study and suggestions for improvements

A. Seibi; A. Karrech; F. Boukadi; T. Pervez

doi:10.1080/15567030802087502

Wellbore path estimation using measurement while drilling techniques: A comparative study and suggestions for improvements

A. Seibi, A. Karrech, F. Boukadi, T. Pervez

Research output: Contribution to journal › Article › peer-review

6 Citations (Scopus)

Abstract

The complexity of wells being drilled has increased over the past few years in order to fulfill the worldwide increase in energy demand. The existing drilling technologies make it possible to construct boreholes with different directions. However, the control of paths and trajectories within the operator requirement is a non-obvious task, because of the data transmission time and the space discretization for measurements. This article aims at reviewing the most common techniques of curvature measurements and data transmission. It also compares them by outlining their advantages and weaknesses.

Original language	English
Pages (from-to)	1205-1216
Number of pages	12
Journal	Energy Sources, Part A: Recovery, Utilization and Environmental Effects
Volume	31
Issue number	14
DOIs	https://doi.org/10.1080/15567030802087502
Publication status	Published - Jan 2009
Externally published	Yes

Keywords

Comparative
Drilling
Estimation
Measurement
Study
Wellbore path

ASJC Scopus subject areas

Renewable Energy, Sustainability and the Environment
Nuclear Energy and Engineering
Fuel Technology
Energy Engineering and Power Technology

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1080/15567030802087502

Cite this

@article{f00d2b7ebb9f42aaad95c04167020c23,

title = "Wellbore path estimation using measurement while drilling techniques: A comparative study and suggestions for improvements",

abstract = "The complexity of wells being drilled has increased over the past few years in order to fulfill the worldwide increase in energy demand. The existing drilling technologies make it possible to construct boreholes with different directions. However, the control of paths and trajectories within the operator requirement is a non-obvious task, because of the data transmission time and the space discretization for measurements. This article aims at reviewing the most common techniques of curvature measurements and data transmission. It also compares them by outlining their advantages and weaknesses.",

keywords = "Comparative, Drilling, Estimation, Measurement, Study, Wellbore path",

author = "A. Seibi and A. Karrech and F. Boukadi and T. Pervez",

year = "2009",

month = jan,

doi = "10.1080/15567030802087502",

language = "English",

volume = "31",

pages = "1205--1216",

journal = "Energy Sources, Part A: Recovery, Utilization and Environmental Effects",

issn = "1556-7036",

publisher = "Taylor and Francis Ltd.",

number = "14",

}

TY - JOUR

T1 - Wellbore path estimation using measurement while drilling techniques

T2 - A comparative study and suggestions for improvements

AU - Seibi, A.

AU - Karrech, A.

AU - Boukadi, F.

AU - Pervez, T.

PY - 2009/1

Y1 - 2009/1

N2 - The complexity of wells being drilled has increased over the past few years in order to fulfill the worldwide increase in energy demand. The existing drilling technologies make it possible to construct boreholes with different directions. However, the control of paths and trajectories within the operator requirement is a non-obvious task, because of the data transmission time and the space discretization for measurements. This article aims at reviewing the most common techniques of curvature measurements and data transmission. It also compares them by outlining their advantages and weaknesses.

AB - The complexity of wells being drilled has increased over the past few years in order to fulfill the worldwide increase in energy demand. The existing drilling technologies make it possible to construct boreholes with different directions. However, the control of paths and trajectories within the operator requirement is a non-obvious task, because of the data transmission time and the space discretization for measurements. This article aims at reviewing the most common techniques of curvature measurements and data transmission. It also compares them by outlining their advantages and weaknesses.

KW - Comparative

KW - Drilling

KW - Estimation

KW - Measurement

KW - Study

KW - Wellbore path

UR - http://www.scopus.com/inward/record.url?scp=70449568924&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=70449568924&partnerID=8YFLogxK

U2 - 10.1080/15567030802087502

DO - 10.1080/15567030802087502

M3 - Article

AN - SCOPUS:70449568924

SN - 1556-7036

VL - 31

SP - 1205

EP - 1216

JO - Energy Sources, Part A: Recovery, Utilization and Environmental Effects

JF - Energy Sources, Part A: Recovery, Utilization and Environmental Effects

IS - 14

ER -

Wellbore path estimation using measurement while drilling techniques: A comparative study and suggestions for improvements

Abstract

Keywords

ASJC Scopus subject areas

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this